Bostitch Siding Nailer

Bostitch Siding Nailers | Stanely Bostich


Bostitch Siding Nailer News:

Stanley Bostitch : N66C – Coil Siding Nailer

Features and Benefits: Drives wire weld and plastic inserted coil nails; Adjustable depth guide sets nails to desired depths quickly and conveniently

Original Source: http://www.bostitch.com/default.asp?CATEGORY=BOS%5FSPECIALTY%5FCONST%5FNAILER&TYPE=PRODUCT&PARTNUMBER=N66C&SDesc=Coil+Siding+Nailer

Bostitch Sheathing And Siding Nailers

Shop Bostitch Sheathing And Siding Nailers – CPO Bostitch is your source for the largest selection of Bostitch Sheathing And Siding Nailers

Original Source: http://www.cpobostitch.com/bostitch-sheathing-and-siding-nailers/bostitch-sheathing-and-siding-nailers,default,sc.html

Stanley Bostitch N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding …

Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a aluminum housing that makes it durable …

Original Source: http://www.amazon.com/Stanley-Bostitch-N66C-1-Aluminum-Housing/dp/B0006FKI5G

siding nailer | eBay – Electronics, Cars, Fashion, Collectibles …

BOSTITCH siding coil Nailer N66C nail gun w/case & 1YR waranty SHIPS IMMEDIATELY. One-day shipping available. Time left: 4.99. 0 bids. 9.99. Buy It Now. Free …

Original Source: http://www.ebay.com/sch/i.html?_nkw=siding+nailer

Stanley Bostitch : N66C – Coil Siding Nailer

Features and Benefits: Drives wire weld and plastic inserted coil nails; Adjustable depth guide sets nails to desired depths quickly and conveniently

Original Source: http://www.bostitch.com/default.asp?CATEGORY=BOS%5FSPECIALTY%5FCONST%5FNAILER&TYPE=PRODUCT&PARTNUMBER=N66C&SDesc=Coil+Siding+Nailer


Paslode Coil Framing Nailer From Canadian Tire

Paslode Coil Framing Nailer From Canadian Tire Check out the price at http://www.canadiantire.ca/AST/browse/6/Tools/1/CompressorsAirTools/PneumaticFasteningT…


dc asked What kind of Nail gun do i need?

I am building an aquarium stand. I have finished the framing
http://img209.imagevenue.com/img.php?image=06271_IMG00084_122_346lo.jpg
http://img199.imagevenue.com/img.php?image=06263_IMG00083_122_371lo.jpg
The pic looks like its tilted but its not, I used a leveler and i took it on my camera phone.
yesterday i purchased plywood to put on the sides to finish it off. Then i plan on staining. my question is what type of finishing nailer if it is a finishing nailer that i need? i want to use a nailer because i dont want to do it by nail and hammer so im using glue than nails. the plywood is 3/8 thick. what gauge and size nails do i need to do what i want. should i use nails or brads? Whats the difference? will either of these two guns work?
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97520
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46309

And got the following answer:

Are you ever planning to use the nail gun again? If so, I’d avoid Harbor Freight tools. They’re way down on the quality scale. Look for a brand like Bostitch or Porter-Cable.

You can use a brad nailer (18 ga.) if you use a little adhesive on the back, such as Liquid Nails or PL 400. This type of nail will leave a smaller hole to patch than a 16 ga. nailer. Hope this helps.

http://www.amazon.com/Porter-Cable-BN200B-8-inch-2-inch-Nailer/dp/B001AJ0LWC/ref=dp_ob_title_hi?ie=UTF8&qid=1224010706&sr=8-3

If you don’t have a compressor:

http://www.amazon.com/Porter-Cable-CFBN125B-4-Inch-Nailer-Compressor/dp/B000HZI6FE/ref=sr_1_14?ie=UTF8&s=hi&qid=1224238045&sr=8-14

dc asked What kind of Nail gun do i need?

I am building an aquarium stand. I have finished the framing
http://img209.imagevenue.com/img.php?image=06271_IMG00084_122_346lo.jpg
http://img199.imagevenue.com/img.php?image=06263_IMG00083_122_371lo.jpg
The pic looks like its tilted but its not, I used a leveler and i took it on my camera phone.
yesterday i purchased plywood to put on the sides to finish it off. Then i plan on staining. my question is what type of finishing nailer if it is a finishing nailer that i need? i want to use a nailer because i dont want to do it by nail and hammer so im using glue than nails. the plywood is 3/8 thick. what gauge and size nails do i need to do what i want. should i use nails or brads? Whats the difference? will either of these two guns work?
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97520
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46309

And got the following answer:

Are you ever planning to use the nail gun again? If so, I’d avoid Harbor Freight tools. They’re way down on the quality scale. Look for a brand like Bostitch or Porter-Cable.

You can use a brad nailer (18 ga.) if you use a little adhesive on the back, such as Liquid Nails or PL 400. This type of nail will leave a smaller hole to patch than a 16 ga. nailer. Hope this helps.

http://www.amazon.com/Porter-Cable-BN200B-8-inch-2-inch-Nailer/dp/B001AJ0LWC/ref=dp_ob_title_hi?ie=UTF8&qid=1224010706&sr=8-3

If you don’t have a compressor:

http://www.amazon.com/Porter-Cable-CFBN125B-4-Inch-Nailer-Compressor/dp/B000HZI6FE/ref=sr_1_14?ie=UTF8&s=hi&qid=1224238045&sr=8-14

dc asked What kind of Nail gun do i need?

I am building an aquarium stand. I have finished the framing
http://img209.imagevenue.com/img.php?image=06271_IMG00084_122_346lo.jpg
http://img199.imagevenue.com/img.php?image=06263_IMG00083_122_371lo.jpg
The pic looks like its tilted but its not, I used a leveler and i took it on my camera phone.
yesterday i purchased plywood to put on the sides to finish it off. Then i plan on staining. my question is what type of finishing nailer if it is a finishing nailer that i need? i want to use a nailer because i dont want to do it by nail and hammer so im using glue than nails. the plywood is 3/8 thick. what gauge and size nails do i need to do what i want. should i use nails or brads? Whats the difference? will either of these two guns work?
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97520
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46309

And got the following answer:

Are you ever planning to use the nail gun again? If so, I’d avoid Harbor Freight tools. They’re way down on the quality scale. Look for a brand like Bostitch or Porter-Cable.

You can use a brad nailer (18 ga.) if you use a little adhesive on the back, such as Liquid Nails or PL 400. This type of nail will leave a smaller hole to patch than a 16 ga. nailer. Hope this helps.

http://www.amazon.com/Porter-Cable-BN200B-8-inch-2-inch-Nailer/dp/B001AJ0LWC/ref=dp_ob_title_hi?ie=UTF8&qid=1224010706&sr=8-3

If you don’t have a compressor:

http://www.amazon.com/Porter-Cable-CFBN125B-4-Inch-Nailer-Compressor/dp/B000HZI6FE/ref=sr_1_14?ie=UTF8&s=hi&qid=1224238045&sr=8-14

dc asked What kind of Nail gun do i need?

I am building an aquarium stand. I have finished the framing
http://img209.imagevenue.com/img.php?image=06271_IMG00084_122_346lo.jpg
http://img199.imagevenue.com/img.php?image=06263_IMG00083_122_371lo.jpg
The pic looks like its tilted but its not, I used a leveler and i took it on my camera phone.
yesterday i purchased plywood to put on the sides to finish it off. Then i plan on staining. my question is what type of finishing nailer if it is a finishing nailer that i need? i want to use a nailer because i dont want to do it by nail and hammer so im using glue than nails. the plywood is 3/8 thick. what gauge and size nails do i need to do what i want. should i use nails or brads? Whats the difference? will either of these two guns work?
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97520
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46309

And got the following answer:

Are you ever planning to use the nail gun again? If so, I’d avoid Harbor Freight tools. They’re way down on the quality scale. Look for a brand like Bostitch or Porter-Cable.

You can use a brad nailer (18 ga.) if you use a little adhesive on the back, such as Liquid Nails or PL 400. This type of nail will leave a smaller hole to patch than a 16 ga. nailer. Hope this helps.

http://www.amazon.com/Porter-Cable-BN200B-8-inch-2-inch-Nailer/dp/B001AJ0LWC/ref=dp_ob_title_hi?ie=UTF8&qid=1224010706&sr=8-3

If you don’t have a compressor:

http://www.amazon.com/Porter-Cable-CFBN125B-4-Inch-Nailer-Compressor/dp/B000HZI6FE/ref=sr_1_14?ie=UTF8&s=hi&qid=1224238045&sr=8-14

dc asked What kind of Nail gun do i need?

I am building an aquarium stand. I have finished the framing
http://img209.imagevenue.com/img.php?image=06271_IMG00084_122_346lo.jpg
http://img199.imagevenue.com/img.php?image=06263_IMG00083_122_371lo.jpg
The pic looks like its tilted but its not, I used a leveler and i took it on my camera phone.
yesterday i purchased plywood to put on the sides to finish it off. Then i plan on staining. my question is what type of finishing nailer if it is a finishing nailer that i need? i want to use a nailer because i dont want to do it by nail and hammer so im using glue than nails. the plywood is 3/8 thick. what gauge and size nails do i need to do what i want. should i use nails or brads? Whats the difference? will either of these two guns work?
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97520
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46309

And got the following answer:

Are you ever planning to use the nail gun again? If so, I’d avoid Harbor Freight tools. They’re way down on the quality scale. Look for a brand like Bostitch or Porter-Cable.

You can use a brad nailer (18 ga.) if you use a little adhesive on the back, such as Liquid Nails or PL 400. This type of nail will leave a smaller hole to patch than a 16 ga. nailer. Hope this helps.

http://www.amazon.com/Porter-Cable-BN200B-8-inch-2-inch-Nailer/dp/B001AJ0LWC/ref=dp_ob_title_hi?ie=UTF8&qid=1224010706&sr=8-3

If you don’t have a compressor:

http://www.amazon.com/Porter-Cable-CFBN125B-4-Inch-Nailer-Compressor/dp/B000HZI6FE/ref=sr_1_14?ie=UTF8&s=hi&qid=1224238045&sr=8-14

dc asked What kind of Nail gun do i need?

I am building an aquarium stand. I have finished the framing
http://img209.imagevenue.com/img.php?image=06271_IMG00084_122_346lo.jpg
http://img199.imagevenue.com/img.php?image=06263_IMG00083_122_371lo.jpg
The pic looks like its tilted but its not, I used a leveler and i took it on my camera phone.
yesterday i purchased plywood to put on the sides to finish it off. Then i plan on staining. my question is what type of finishing nailer if it is a finishing nailer that i need? i want to use a nailer because i dont want to do it by nail and hammer so im using glue than nails. the plywood is 3/8 thick. what gauge and size nails do i need to do what i want. should i use nails or brads? Whats the difference? will either of these two guns work?
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97520
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46309

And got the following answer:

Are you ever planning to use the nail gun again? If so, I’d avoid Harbor Freight tools. They’re way down on the quality scale. Look for a brand like Bostitch or Porter-Cable.

You can use a brad nailer (18 ga.) if you use a little adhesive on the back, such as Liquid Nails or PL 400. This type of nail will leave a smaller hole to patch than a 16 ga. nailer. Hope this helps.

http://www.amazon.com/Porter-Cable-BN200B-8-inch-2-inch-Nailer/dp/B001AJ0LWC/ref=dp_ob_title_hi?ie=UTF8&qid=1224010706&sr=8-3

If you don’t have a compressor:

http://www.amazon.com/Porter-Cable-CFBN125B-4-Inch-Nailer-Compressor/dp/B000HZI6FE/ref=sr_1_14?ie=UTF8&s=hi&qid=1224238045&sr=8-14

dc asked What kind of Nail gun do i need?

I am building an aquarium stand. I have finished the framing
http://img209.imagevenue.com/img.php?image=06271_IMG00084_122_346lo.jpg
http://img199.imagevenue.com/img.php?image=06263_IMG00083_122_371lo.jpg
The pic looks like its tilted but its not, I used a leveler and i took it on my camera phone.
yesterday i purchased plywood to put on the sides to finish it off. Then i plan on staining. my question is what type of finishing nailer if it is a finishing nailer that i need? i want to use a nailer because i dont want to do it by nail and hammer so im using glue than nails. the plywood is 3/8 thick. what gauge and size nails do i need to do what i want. should i use nails or brads? Whats the difference? will either of these two guns work?
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97520
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46309

And got the following answer:

Are you ever planning to use the nail gun again? If so, I’d avoid Harbor Freight tools. They’re way down on the quality scale. Look for a brand like Bostitch or Porter-Cable.

You can use a brad nailer (18 ga.) if you use a little adhesive on the back, such as Liquid Nails or PL 400. This type of nail will leave a smaller hole to patch than a 16 ga. nailer. Hope this helps.

http://www.amazon.com/Porter-Cable-BN200B-8-inch-2-inch-Nailer/dp/B001AJ0LWC/ref=dp_ob_title_hi?ie=UTF8&qid=1224010706&sr=8-3

If you don’t have a compressor:

http://www.amazon.com/Porter-Cable-CFBN125B-4-Inch-Nailer-Compressor/dp/B000HZI6FE/ref=sr_1_14?ie=UTF8&s=hi&qid=1224238045&sr=8-14

dc asked What kind of Nail gun do i need?

I am building an aquarium stand. I have finished the framing
http://img209.imagevenue.com/img.php?image=06271_IMG00084_122_346lo.jpg
http://img199.imagevenue.com/img.php?image=06263_IMG00083_122_371lo.jpg
The pic looks like its tilted but its not, I used a leveler and i took it on my camera phone.
yesterday i purchased plywood to put on the sides to finish it off. Then i plan on staining. my question is what type of finishing nailer if it is a finishing nailer that i need? i want to use a nailer because i dont want to do it by nail and hammer so im using glue than nails. the plywood is 3/8 thick. what gauge and size nails do i need to do what i want. should i use nails or brads? Whats the difference? will either of these two guns work?
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97520
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46309

And got the following answer:

Are you ever planning to use the nail gun again? If so, I’d avoid Harbor Freight tools. They’re way down on the quality scale. Look for a brand like Bostitch or Porter-Cable.

You can use a brad nailer (18 ga.) if you use a little adhesive on the back, such as Liquid Nails or PL 400. This type of nail will leave a smaller hole to patch than a 16 ga. nailer. Hope this helps.

http://www.amazon.com/Porter-Cable-BN200B-8-inch-2-inch-Nailer/dp/B001AJ0LWC/ref=dp_ob_title_hi?ie=UTF8&qid=1224010706&sr=8-3

If you don’t have a compressor:

http://www.amazon.com/Porter-Cable-CFBN125B-4-Inch-Nailer-Compressor/dp/B000HZI6FE/ref=sr_1_14?ie=UTF8&s=hi&qid=1224238045&sr=8-14