Cordless Finish Nailers

16 Gauge Cordless Finish Nailer | Bostitch Electronic Press Kit

Industry’s Best Pneumatic Framing Nailers by Mallory Kramer

For many craftsmen, a pneumatic framing nailer is one of the greatest tools in the world. Making quick work of jobs that can take what feels like forever, and doing it with professional strength and precision, these nailers are an irreplaceable asset. If you’re in the market for one of the best framing nailers in the pneumatic world, well, you’re in luck. The following is a compiled, compacted set of reviews of the best framing nailers, and their prices, on the market today.

Hitachi’s NR83A2 framing nailer is one of the most high-quality, high-performance pneumatic framers on the market today. Weighing only 7.9 lbs the tool is clearly lightweight and the tool is extremely well balanced for the most comfortable operation and maneuverability. The framer has a tool-less depth adjustment allowing craftsmen to choose their depth of drive, and with an open nose design, extracting a jammed nail is hardly a hassle. The framer also features selective actuation, a favorite feature of most users, which allow craftsmen to simply transition from single actuation to contact actuation for the greatest versatility through a variety of applications. The tool is strong, fast, and versatile, and because it’s also so lightweight and well-balanced, continuous work and awkward applications are far less strenuous. Ultimately, the NR83A2 is a seriously tough framer built for durability on the jobsite and for reliability through the most heavy-duty applications. Lastly,pricing from about 0 – 0, Hitachi’s framer is a bit spendy, but is worth every penny. (Note: This tool is also available as a sequential trigger gun (NR83A2S) for just about 0.)

On another hand, Porter-Cable’s FR350A 3-1/2″ roundhead framing nailer is one of the more heavy-duty pneumatic framing tools on the market today. With the power to drive nails up to 3-1/2″ x 131″ into engineered lumber, the tool has intense power. The framer’s compact body design contributes to its well-balance and overall smooth style while an internal piston catch mechanism ensures each shot is consistently powerful. A selectable trigger transitions modes between restrictive or contact actuation mode, and with a tool-free adjustable depth-of-drive, craftsmen have complete control over the tool’s performance. The tool is simple to reload, and a nail lockout mechanism alerts you when its time to reload your tool. Keeping your materials protected during work, the framer also has a (tool-free, adjustable) exhaust and a (removable) non-marring nose tip, and also having on-tool storage, the FR350AR is endlessly convenient. Ranging in price from about 0 – 0, the framer is abrilliant tool at a certainly reasonable price.

The FR350A is also available reconditioned (FR350AR) for just about 0. As a reconditioned tool, this nailer presents a truly superior value to craftsmen and builders. For those unfamiliar with recons, they are an extremely great value that bring craftsmen the highest-performance tools at a tiny fraction of regular cost. Reconditioned tools, for some minor cosmetic or technical defect, have been returned to the manufacturer. There, they undergo a series of stringent tests and retests and restoration processes before being re-released with an “R” trailing the model number. This little “R” (and potentially hundreds of dollars) is truly the only difference between a brand new tool and a recon. The value with reconditioned tools is a no-brainer; when they are available, buy them.

Like Hitachi and Porter-Cable, Senco is known for building some of the best pneumatic tools and nailers in the industry. With well-seasoned experience and superior craftsmanship, Senco is an steadfast contender in the world of pneumatics. Pricing from about 0 – 0, their SN902XP framing nailer is a brilliant and saucy little tool with 904 in/lbs of power in a compact, 7.3 lb package. This round head framer is also built with a innovated design that requires up to fifteen-percent less air than other comparable models, and still having the power to drive 2 – 3-1/4″ (round head plastic collated) framing nails with fast efficiency, the nailer perfectly unites precision power and lightweight convenience. The nailer also drives 2″-3-1/2″ smooth shank nails and 2″-3″ ring shank nails. The tool’s compact design also contributes to its ability to work in tight spaces in between studs and joists, and its overall balance and ease of operation. Additionally, the gun is easy to transition from rapid fire to sequential fire and is simple to load and unload for optimal convenience on the job. The SN902XP is ideal for a huge number of applications from framing, fencing and subfloors, to trusses and decking. It additionally has a patented TrueDrive magazine to prevent jamming and an adjustable depth of drive for unfailing precision with every shot. Like the above Porter-Cable nailer, Senco’s SN902XP is also available reconditioned (if you can find it) for about 0.

In the end and whatever your needs may be, one of these nailers is certain to be an ideal framer. With big power, acute precision, and the accountability of a time-honored manufacturer, these pneumatic framing nailers are the best of the best.

Original Source: http://www.articlecity.com/articles/home_improvement/article_4496.shtml


Drywall Screw Gun, Palm Sized

By Alfredo Jeffrey Mercado on March 12, 2011 0

These could frequently be badly balanced and hard to utilize. Many businesses at the instant are production expert regular building work resources which are now not compromising build quality however are benefiting from the latest in lightweight technologies. The outcome is a variety of tools, which will often include a palm dimension drywall screw gun, which are as robust as their heavier predecessors but much simpler to utilize. A lot study has long past into the style of the contemporary resources both from a technical and ergonomic viewpoint. Another element of a minimum of one palm size drywall screw gun is actually a nostril piece that will maintain its depth setting. This indicates that if you should need to alter the nostril piece for any cause, you can exchange it without having having to move through all the hard resetting and adjusting. The depth settings are particularly important for drywall function since the screws must be arranged beneath the surface from the board but the screwing motion must stop before damage is done to the paper of the drywall. If time isn’t spent within the establishing from the nostril piece then you will discover your self investing extra time in placing points correct. With those screw weapons you can get rid of the nostril piece without interfering with those settings. This will ensure that you can swap between jobs with ease.

The new breed of construction resources are continuously turning out to be lighter that is, in flip, making them a lot much more easy to use. The palm size drywall screw gun is constructed from materials that have gone through a lot of study and research so that you simply can discover the lightest options possible while still conserving the strength needed for large usage.

Not just the palm size drywall screw gun, but the whole range of contemporary tools has taken a action within the right direction with regards to effectiveness, security and relieve of use.

three Greatest Corded Drywall Screw-Weapons

Fortunately for these difficult toolers, Dewalt, Makita, and Milwaukee every offer a corded drywall screw-gun that rises above the competitors with heavy-obligation energy and always excessive-performance. Exemplifying the really greatest in the business, those corded screw-guns make sure superior overall performance and always excellent results.

To start, Dewalt’s DW276 all-function screw-gun is among the most amazing tools in at present’s industry boasting all the features that make a screw-gun this sort of a necessary instrument. With a whopping 6.five amp variable rate, reversing motor, the tool has the higher torque and big power to master every industrial job. While still weighing only three.six lbs, the device is built with heavy-obligation helical-minimize metal for serious durability, and with warmth-treated gears to make sure a surplus of lengthy years and exceptional overall performance. The device’s higher torque is perfect for heavy- duty applications like deck constructing and heavy gauge metal stud framing, and having a metal gear housing, the device boasts stable durability while ultimate ergonomically comfy and simple to utilize. On another hand, Makita’s 6827 (variable rate, reversible) screwdriver is one large, high- performance, excessive-high quality drill with functions, like a powerful motor and big torque, to trap even the most thoroughbred craftsmen. Mentioned snatch mechanism is created for that such a lot exact and powerful torque, and that includes a silent synchronized pin grab that is both ultra quiet and works to reduce wear, the weapon is certainly long lasting. Positive-Lock level changes provide consistent screw level environment, and, about the inside, the instrument’s warmth handled, system reduce gears provide efficient energy switch and super clean operation. Designed with comfortable style and with a lightweight solid aluminum gear housing, the tool is durable while still offering consolation and controlability. One of the really best drills within the business, Makita’s 6827 is actually a tool you’ll by no means regret adding to your device repertoire.

Furthermore, the device has a ramp-off depth locater for simple and accurate level adjustments, and simply because the device is corded you can be certain it’s energy and capacities will by no means be sub-par. The screwdriver is perfect for software from tough to minimum use; however, nevertheless you utilize the tool, it’ll unquestionably be kicking for any healthy lengthy time. Milwaukee builds a few of the greatest corded drills in the business, and also the 6740-20 is really a shining instance of their long lasting, excessive-performance regular.

With any of these heavy-duty drywall screw-guns craftsmen are sure to appreciate a excellent working experience, and certain to achieve always precise, professional outcomes.

Nailing Or Screwing Drywall

Nails as opposed to screws who will become the winner. While drywall very first arrived out the installers utilized everything from normal metal coil nails to galvanized roofing nails. After a brief amount of your time they began to develop main difficulties from nails coming out from the finished drywall.

Nail popping results when the nail is driven into moist lumber and since the lumber shrinks the house settles and nail can actually come out to the walls. How much the nail might actually pop out was determined by way of how much it used to be driven in to the framing studs or ceiling joists. This labored excellent but those nails were hard to generate in and may often break.

Those new nails worked excellent and experienced good holding energy and eliminated a whole lot of nail popping.

Using coil nails means driving them in with a hammer. If you omit the nail you damage the drywall. This appeared to be a large issue and was practically eliminated with the screws.

Nicely fairly quickly people began utilizing screws which experienced greater retaining energy and pretty a lot nail popping. This means much less exertions setting up and ending the drywall.

There’s one issue using the screws and that is they need to be arranged perfectly. They can no longer holiday the paper surface area on the drywall but have to be set enough into the drywall to ensure that it can be finished properly. Such a lot screw weapons have an adjustable setting used to obtain just the correct depth for the screws set up within the drywall. That doesn’t imply the coil nails just obtained screwed or even the screws simply got nailed.

Original Source: http://www.sooperarticles.com/home-improvement-articles/drywall-screw-gun-palm-sized-112355.html

Cordless Finish Nailers News:

Finish Nailers | ToolBarn.com – Power Tools, Air Tools, Cordless …

Run on a battery or a gas fuel cell that generates the charge, you can effectively drive finish or brad nails into trim or molding with the hassle of using a hose or …

Original Source: http://www.toolbarn.com/power-tools/cordless-tools/nailers/finish-nailers.html

cordless. finish nailer | eBay – Electronics, Cars, Fashion …

Find great deals on eBay for cordless. finish nailer and paslode finish nailer. Shop with confidence.

Original Source: http://www.ebay.com/sch/i.html?_nkw=cordless.+finish+nailer

Amazon.com: senco cordless finish nailer – Tools & Home Improvement

SENCO 5P0001N F-16A, Cordless Fusion 2-1/2-in 16-Gauge 20 Degree Angled Finish Nailer

Original Source: http://www.amazon.com/s?ie=UTF8&keywords=senco%20cordless%20finish%20nailer&page=1&rh=n%3A228013%2Ck%3Asenco%20cordless%20finish%20nailer

Finish Nailers | ToolBarn.com – Power Tools, Air Tools, Cordless …

Run on a battery or a gas fuel cell that generates the charge, you can effectively drive finish or brad nails into trim or molding with the hassle of using a hose or …

Original Source: http://www.toolbarn.com/power-tools/cordless-tools/nailers/finish-nailers.html

Amazon.com: Nailers: Tools & Home Improvement

Paslode Cordless 16-gauge Angled Finish Nailer no. 900600. 9.00 9.99; Only 19 left in stock – order soon. More Buying Choices; 0.00 new (8 offers) 9.95 …

Original Source: http://www.amazon.com/b?ie=UTF8&node=552758


Paslode IM250A LI Cordless Finish Nailer – Real User Review & How To

http://www.toolselect.com/product/detail/Paslode-IM250A-LI ToolSELECT.com put the Paslode IM250A LI 16-gauge Cordless Finish Nailer into the hands of Brian V…


rlanicek asked What nailer should I get?

I’m about to install a wooden board-on-board privacy fence, which is a perfect excuse to buy a nailer. Obviously I need a nailer that will suffice for that purpose, but I would like a good all-around nailer for other projects as well. Do I want a framing nailer? Finish nailer? Air or cordless? Brand? Strip or coil? Thanks!

And got the following answer:

That particular job can be done with either a frameing or finish nailer depending on the thickness of the boards you are using. This is one instance where an air crown stapler also does well. If you go for the framing (probably the most common you will need) or finish nailer, Pasalode makes a cordless nailer that works real well

Blake H asked What tools would I need to get started in WoodWorking?

For power tools would I need a Miter Saw, a Circular Saw, and a Jigsaw? Also, does Bosch or DeWalt make better saws. And if Bosch or DeWalt don’t make good saws who does? I want to have a reasonably priced saw that works good, I sorta have a budget since im 15. Thanks!
lol, i wish i did have someone to help me.

And got the following answer:

Immediate needs: Orbital sander, cordless drill, jig saw, circular saw, good set of bits.

When you can afford them: Router, biscuit joiner, miter saw (go with the Bosch or a Hitachi), compressor/finish nailer/brad nailer, table saw, jointer, dust collection system.

Down the road: Second router, trim saw, second cordless, and upgrading any of the tools you have. Get a good book on making jigs and fixtures. These can save you a ton of time and effort if you do a project often. Don’t forget about all of the consumables (nails, screws, stain/paint/varnish, glue, etc.). Woodworking is a great hobby. Good luck to you.

iffley asked What tools are a must have for home improvement?

I’m moving into my first home and want to purchase good quality tools that I’ll be using to build a new wall, tear down an old one, refinish some cabinets and things like that. What brand of tools should I go with and what specific tools do you suggest?

And got the following answer:

17 years as a GM mechanic taught me that Snap-on tools where worth the money when you used them daily, for the average home owner I would go with craftsmen, husky, etc. that have a lifetime warranty for sockets, wrenches, screwdrivers, etc. as for power tools the brands I like are Milwaukee, makita, dewalt, in that order just to name a few. never owned a bad Milwaukee tool, the others seem to make good and not so good lines so I buy the better (more expensive) ones.

now if your tearing down a wall and building a wall, you’ll need a good framers hammer. I’d go at least 20 oz. (26-32 is best but what ever your comfortable with) steel handle is my preference. Erwin I believe is the brand I own, but there are many good brands. a good pry bar or three big, med, small. a 12-14″ flat bar is a must, start there. A saws-all (hint: Milwaukee invented the saws-all) with a variety of blades, all purpose and a metal/hacksaw type, for starters. with those three tools you can tear down a house.

to build the wall you have the hammer. you’ll need a good circular saw, I love my makita! 99-110$ would own no other! A combination/framers blade, and a good finish blade (32-64 teeth) if your going to cut plywood or other finish wood. A framers/carpenters square, not a framing square unless your building stairs. A plumb bob and a good level (all levels need to be checked for accuracy, buying an expensive one doesn’t work here) check each bubble on a level/plumb surface and flip the level 180 deg. end to end and check again. you should get the same reading then turn it over and repeat. check all bubbles. nails I four building a single wall but an air nailer if you finishing a basement. drywall screw gun, utility knife, drywall square, 5″, 8″, 14″ taping knife, stainless steel mud pan, 18 volt cordless drill, corded drill-with 1/2″ chuck, mud mixer, orbital palm sander, belt sander, mini-rotary cutter “dremmel”, just to name a few.

17 years as GM mechanic, 7 years as building contractor, 3 years home inspector, have bought over $40,000 worth of personal tools. I’ve only scratched the surface so far, contact me if you want more specific info. I could go on for days……..my wife hates any tool sales place, but she loves my repairs!

Rob asked I want to buy a finish nailer gun, what should I get?

…for installing pre-hung doors(needs to fire 2 1/2 finish nails and 1 1/4 finish nails) and for installing moulding(crown moulding and baseboards). What is 16-guage, 18-gauge, etc…? Also, should I get a nailer that uses a compressor or DC current(cordless)?

And got the following answer:

http://www.bostitch.com
I’ve been using bostitch products for 30 years without a problem.Look at different sellers for a deal,I just bought a new pancake compressor and got a 2 in. nailer free at Lowes.Go with compressed air,air tools last forever with simple care,plus you can use the compressor for other things as well.

JFalcon asked What definitive set of power tools should a person purchase for the purpose of home upgrades and repairs?

As a fairly new homeowner, I’m finding lots of little things that need to be done. Minor repairs to the garage door, minor soffit and fascia damage, repairing doors and drywall, etc. I like to have the best tool for the job, but when it comes to cutting or finishing, there are several tools more adapted for a particular job. If one were to have the perfect “toolbox” (or perhaps toy box) with practical (not highly specialized) tools, what should it contain?
Well, I did specify power tools, but I suppose that mentioning other tools is fine as well. I already have a hammer, measuring tape, cordless drill and a fairly complete socket wrench set. What’s interesting is that ‘drill’ was mentioned more than once; aside from drilling holes, I assume that others use theirs for planting screws?

I will definitely need to cut wood, but don’t know if I necessarily need a table saw. I did like the suggestion of a reciprocating saw. For those who are suggesting tools, could you please also note what types of modifications and/or repairs for which they are most useful? Many thanks!

And got the following answer:

Since you already have a cordless drill, I’d suggest (more or less in this order):

A handheld circular saw (sometimes called a Skil saw, but Dewalt and Porter-Cable make better basic ones than Skil). A reciprocating saw is good for demolition and rough work, but not for precise, clean cuts–I’d get that only when you have a job for it. But do get a hand held jig saw (sabre saw)–Bosch, Porter-Cable and DeWalt make good ones. A compound miter saw is nice if you are doing any trim at all–DeWalt’s 12″ model is a real workhorse, right around $300, but a 10″ saw can be had for much less.

I also have a spiral saw that I use for drywall cutouts, a router that I constantly find new uses for, a random orbit sander that I can’t live without, and a 4″ belt sander I’ve used on every remodel job I’ve had since I bought it. Mine are all Porter-Cable.

If you can afford it, a small air compressor with 18 gauge and 15 gauge finish nail guns is great–if you can only have one finish nailer, I’d say 16 g. The compressor can also be used with a paint sprayer, tire inflater, air hammer, etc.