Finish Nail Guns

Bostitch Oil-free Finish Nailer Kit - FN16250K-

Industry’s Best Pneumatic Framing Nailers by Mallory Kramer

For many craftsmen, a pneumatic framing nailer is one of the greatest tools in the world. Making quick work of jobs that can take what feels like forever, and doing it with professional strength and precision, these nailers are an irreplaceable asset. If you’re in the market for one of the best framing nailers in the pneumatic world, well, you’re in luck. The following is a compiled, compacted set of reviews of the best framing nailers, and their prices, on the market today.

Hitachi’s NR83A2 framing nailer is one of the most high-quality, high-performance pneumatic framers on the market today. Weighing only 7.9 lbs the tool is clearly lightweight and the tool is extremely well balanced for the most comfortable operation and maneuverability. The framer has a tool-less depth adjustment allowing craftsmen to choose their depth of drive, and with an open nose design, extracting a jammed nail is hardly a hassle. The framer also features selective actuation, a favorite feature of most users, which allow craftsmen to simply transition from single actuation to contact actuation for the greatest versatility through a variety of applications. The tool is strong, fast, and versatile, and because it’s also so lightweight and well-balanced, continuous work and awkward applications are far less strenuous. Ultimately, the NR83A2 is a seriously tough framer built for durability on the jobsite and for reliability through the most heavy-duty applications. Lastly,pricing from about 0 – 0, Hitachi’s framer is a bit spendy, but is worth every penny. (Note: This tool is also available as a sequential trigger gun (NR83A2S) for just about 0.)

On another hand, Porter-Cable’s FR350A 3-1/2″ roundhead framing nailer is one of the more heavy-duty pneumatic framing tools on the market today. With the power to drive nails up to 3-1/2″ x 131″ into engineered lumber, the tool has intense power. The framer’s compact body design contributes to its well-balance and overall smooth style while an internal piston catch mechanism ensures each shot is consistently powerful. A selectable trigger transitions modes between restrictive or contact actuation mode, and with a tool-free adjustable depth-of-drive, craftsmen have complete control over the tool’s performance. The tool is simple to reload, and a nail lockout mechanism alerts you when its time to reload your tool. Keeping your materials protected during work, the framer also has a (tool-free, adjustable) exhaust and a (removable) non-marring nose tip, and also having on-tool storage, the FR350AR is endlessly convenient. Ranging in price from about 0 – 0, the framer is abrilliant tool at a certainly reasonable price.

The FR350A is also available reconditioned (FR350AR) for just about 0. As a reconditioned tool, this nailer presents a truly superior value to craftsmen and builders. For those unfamiliar with recons, they are an extremely great value that bring craftsmen the highest-performance tools at a tiny fraction of regular cost. Reconditioned tools, for some minor cosmetic or technical defect, have been returned to the manufacturer. There, they undergo a series of stringent tests and retests and restoration processes before being re-released with an “R” trailing the model number. This little “R” (and potentially hundreds of dollars) is truly the only difference between a brand new tool and a recon. The value with reconditioned tools is a no-brainer; when they are available, buy them.

Like Hitachi and Porter-Cable, Senco is known for building some of the best pneumatic tools and nailers in the industry. With well-seasoned experience and superior craftsmanship, Senco is an steadfast contender in the world of pneumatics. Pricing from about 0 – 0, their SN902XP framing nailer is a brilliant and saucy little tool with 904 in/lbs of power in a compact, 7.3 lb package. This round head framer is also built with a innovated design that requires up to fifteen-percent less air than other comparable models, and still having the power to drive 2 – 3-1/4″ (round head plastic collated) framing nails with fast efficiency, the nailer perfectly unites precision power and lightweight convenience. The nailer also drives 2″-3-1/2″ smooth shank nails and 2″-3″ ring shank nails. The tool’s compact design also contributes to its ability to work in tight spaces in between studs and joists, and its overall balance and ease of operation. Additionally, the gun is easy to transition from rapid fire to sequential fire and is simple to load and unload for optimal convenience on the job. The SN902XP is ideal for a huge number of applications from framing, fencing and subfloors, to trusses and decking. It additionally has a patented TrueDrive magazine to prevent jamming and an adjustable depth of drive for unfailing precision with every shot. Like the above Porter-Cable nailer, Senco’s SN902XP is also available reconditioned (if you can find it) for about 0.

In the end and whatever your needs may be, one of these nailers is certain to be an ideal framer. With big power, acute precision, and the accountability of a time-honored manufacturer, these pneumatic framing nailers are the best of the best.

Original Source: http://www.articlecity.com/articles/home_improvement/article_4496.shtml


Drywall Screw Gun, Palm Sized By Alfredo Jeffrey Mercado on March 12, 2011 0

These could frequently be badly balanced and hard to utilize. Many businesses at the instant are production expert regular building work resources which are now not compromising build quality however are benefiting from the latest in lightweight technologies. The outcome is a variety of tools, which will often include a palm dimension drywall screw gun, which are as robust as their heavier predecessors but much simpler to utilize. A lot study has long past into the style of the contemporary resources both from a technical and ergonomic viewpoint. Another element of a minimum of one palm size drywall screw gun is actually a nostril piece that will maintain its depth setting. This indicates that if you should need to alter the nostril piece for any cause, you can exchange it without having having to move through all the hard resetting and adjusting. The depth settings are particularly important for drywall function since the screws must be arranged beneath the surface from the board but the screwing motion must stop before damage is done to the paper of the drywall. If time isn’t spent within the establishing from the nostril piece then you will discover your self investing extra time in placing points correct. With those screw weapons you can get rid of the nostril piece without interfering with those settings. This will ensure that you can swap between jobs with ease.

The new breed of construction resources are continuously turning out to be lighter that is, in flip, making them a lot much more easy to use. The palm size drywall screw gun is constructed from materials that have gone through a lot of study and research so that you simply can discover the lightest options possible while still conserving the strength needed for large usage.

Not just the palm size drywall screw gun, but the whole range of contemporary tools has taken a action within the right direction with regards to effectiveness, security and relieve of use.

three Greatest Corded Drywall Screw-Weapons

Fortunately for these difficult toolers, Dewalt, Makita, and Milwaukee every offer a corded drywall screw-gun that rises above the competitors with heavy-obligation energy and always excessive-performance. Exemplifying the really greatest in the business, those corded screw-guns make sure superior overall performance and always excellent results.

To start, Dewalt’s DW276 all-function screw-gun is among the most amazing tools in at present’s industry boasting all the features that make a screw-gun this sort of a necessary instrument. With a whopping 6.five amp variable rate, reversing motor, the tool has the higher torque and big power to master every industrial job. While still weighing only three.six lbs, the device is built with heavy-obligation helical-minimize metal for serious durability, and with warmth-treated gears to make sure a surplus of lengthy years and exceptional overall performance. The device’s higher torque is perfect for heavy- duty applications like deck constructing and heavy gauge metal stud framing, and having a metal gear housing, the device boasts stable durability while ultimate ergonomically comfy and simple to utilize. On another hand, Makita’s 6827 (variable rate, reversible) screwdriver is one large, high- performance, excessive-high quality drill with functions, like a powerful motor and big torque, to trap even the most thoroughbred craftsmen. Mentioned snatch mechanism is created for that such a lot exact and powerful torque, and that includes a silent synchronized pin grab that is both ultra quiet and works to reduce wear, the weapon is certainly long lasting. Positive-Lock level changes provide consistent screw level environment, and, about the inside, the instrument’s warmth handled, system reduce gears provide efficient energy switch and super clean operation. Designed with comfortable style and with a lightweight solid aluminum gear housing, the tool is durable while still offering consolation and controlability. One of the really best drills within the business, Makita’s 6827 is actually a tool you’ll by no means regret adding to your device repertoire.

Furthermore, the device has a ramp-off depth locater for simple and accurate level adjustments, and simply because the device is corded you can be certain it’s energy and capacities will by no means be sub-par. The screwdriver is perfect for software from tough to minimum use; however, nevertheless you utilize the tool, it’ll unquestionably be kicking for any healthy lengthy time. Milwaukee builds a few of the greatest corded drills in the business, and also the 6740-20 is really a shining instance of their long lasting, excessive-performance regular.

With any of these heavy-duty drywall screw-guns craftsmen are sure to appreciate a excellent working experience, and certain to achieve always precise, professional outcomes.

Nailing Or Screwing Drywall

Nails as opposed to screws who will become the winner. While drywall very first arrived out the installers utilized everything from normal metal coil nails to galvanized roofing nails. After a brief amount of your time they began to develop main difficulties from nails coming out from the finished drywall.

Nail popping results when the nail is driven into moist lumber and since the lumber shrinks the house settles and nail can actually come out to the walls. How much the nail might actually pop out was determined by way of how much it used to be driven in to the framing studs or ceiling joists. This labored excellent but those nails were hard to generate in and may often break.

Those new nails worked excellent and experienced good holding energy and eliminated a whole lot of nail popping.

Using coil nails means driving them in with a hammer. If you omit the nail you damage the drywall. This appeared to be a large issue and was practically eliminated with the screws.

Nicely fairly quickly people began utilizing screws which experienced greater retaining energy and pretty a lot nail popping. This means much less exertions setting up and ending the drywall.

There’s one issue using the screws and that is they need to be arranged perfectly. They can no longer holiday the paper surface area on the drywall but have to be set enough into the drywall to ensure that it can be finished properly. Such a lot screw weapons have an adjustable setting used to obtain just the correct depth for the screws set up within the drywall. That doesn’t imply the coil nails just obtained screwed or even the screws simply got nailed.

Original Source: http://www.sooperarticles.com/home-improvement-articles/drywall-screw-gun-palm-sized-112355.html

Finish Nail Guns News:

Finish Nail Guns – NailGuns

Finish nail guns for sale. All brands and models of finishing nail guns.

Original Source: http://nailgunsales.com/home/finishing

finish nail gun | eBay – Electronics, Cars, Fashion, Collectibles …

Find great deals on eBay for finish nail gun and framing nail gun. Shop with confidence.

Original Source: http://www.ebay.com/sch/i.html?_nkw=finish+nail+gun

Finish Nail Guns – NailGuns

Finish nail guns for sale. All brands and models of finishing nail guns.

Original Source: http://nailgunsales.com/home/finishing

Finish Nail Guns, Brad Nailer – Trim Carpentry. Finish Carpentry …

The only finish nail guns I use in finish carpentry come in two sizes.

Original Source: http://www.finishcarpentryhelp.com/finish-nail-guns.html

finish nail gun | eBay – Electronics, Cars, Fashion, Collectibles …

Find great deals on eBay for finish nail gun and framing nail gun. Shop with confidence.

Original Source: http://www.ebay.com/sch/i.html?_nkw=finish+nail+gun


Hitachi Tool Corner- NT50AE2 2in. 18-Gauge Finish Nailer

The Hitachi NT50AE2 2″ 18-Gauge Finish Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8″ in …


Brieanne asked Do finish carpenters ever shoot nails into electrical wires when installing molding and trim?

When finish carpenters use nail guns to install trim and molding in houses, do they ever accidentally shoot nails into live electrical wires? Suppose the wire goes “POP”, lets out sparks, and the power on the circuit goes out. What do they do when this happens? What if it’s an existing home where the homeowner simply wanted to re-decorate and install new trim, rather than a new home under construction?

And got the following answer:

That is a carpenters NIGHTMARE!
Most of the time the wires are done right and placed in the middle of the depth of the wall so that if the right size nails and a little common sense are used, this can be avoided. Luckily, I’ve only done it with low voltage doorbell wire and the repair was easy. Damaging a higher voltage line can be much more serious and may require an electrician to run a new wire.
Chris

f4.ltz400 asked can i get some advice on nail guns?

i am looking to get me a nail gun. i would like to use it for framing and also wall trim. when i went to the home depot today there were at least 50 styles. i dont want to buy one and its only good for one type of work, i need one for multiple applications. any advice would be great! i know NOTHING about them.

And got the following answer:

Unfortunately, nail-guns don’t come in a ‘one size fits all’ category. As others have posted, they are application specific.

Before you put down your hard earned money on one, think about what you are most likely to use it for. In my case, while I would like to have a framing nailer, my house is built and don’t see needing to build anything so big in the immediate future that I couldn’t nail by hand. Even finishing my basement, framing up a storage shed & adding on to my mom’s house was do-able by hand.

On the other hand, in ‘sprucing up’ our house, I’ve added chair rail, crown mold and other trim using a finish nailer. Having the pneumatic finish nailer has been invaluable and has paid for itself many times over.

It all comes down to what you plan to do the most with.

As for a specific brand, my Stanly-Bostich has digested a few thousand nails with no problems. Can’t say anything about the others, but my coworker has a coil-roofing nailer and framing nailer (Senco) that he has used extensively building two homes over the past four years. Also trouble free.

Best of luck – just be certain to be careful and above all else – wear eye protection.

Brandon asked What is the better finish nail gun on the market?

I am looking to buy a finish nail gun soon, but am not sure what brands to consider. What is the better brand to buy?

And got the following answer:

Are you looking for pneumatic or cordless? For cordless, the best one is made by Paslode. they are available in 16 gauge angled, 16 gauge straight, or 18 gauge straight. For pneumatic, Senco makes nice guns, as do Porter-Cable and Paslode. Hope this helps.

Sean Thompson asked What sort of nail gun and size of nail do I want if I am repairing a fence or building a deck?

I have never used a nail gun and am uncertain of what type I would get the most use out of. I see that there are different size nails, depending on whether one is using a finishing nail gun or a framing nail gun. I am assuming I would need a framing nail gun, using at least 2″ nails, but am not certain.

And got the following answer:

get a battery operated drill and use screws instead. you will be better off.

kenneth d asked Staples for cedar shake siding?

Going to be putting up some cedar shake siding directly over T1-11, how many staples do i need in each? And how far from the edges should i place them? I dont want to use nails because i only have a finish nail gun for my compressor. As well whats the easiest way to stain them?
They do have 11/2″ galvanized staples, are they for a different application?

And got the following answer:

I would strongly suggest hand nailing, regardless of what type of nail guns you own. Guns have a tendency to over or under drive the nails unless you pay constant attention the line pressure and drive depth settings. Shake nails are cheap enough, and once you get going, its a rather fulfilling and pleasant way to spend the day. Put some Mozart on the radio, grab your low angle block and knife and get into a Zen shingling mode and enjoy.

Unless the shingles are very wide (greater than 12″) use only 2 nails per, 3/4 – 1″ in from each side.

Also if your budget permits, this is a great chance to grab a couple of “R’s” by installing Dow wrap first (the light blue spongy stuff). It has some insulation value and will permit good ventilation behind the shingles.

Answers asked Where can I get a Sithl finish nail gun?

I’m looking for a Stihl finish nail gun. I live in Ohio and I’m trying to find one locally. I think they’re either called finish nailer or finish nail gun. I’m looking for an American made product, so if there aren’t any Stihl products around, what’s another brand I can get, that’s as made-in-America as possible?

And got the following answer:

Good luck , Stihl does not make nail guns, just gas power tools. Maybe go to one of the box stores and buy a good Bostich nailer. Mad by Stanley

Miss Mary asked How to hang bead board on a lathe/plaster ceiling?

Old house, peeling paint, uneven ceiling surface, holes. what method to hold up 4X8 bead panel sheets. Finish nail gun not working. pulls out. Liquid nails not working because of poor plaster quality. (other problem is Hubby does great with metal/vehicles but not wood, can’t afford to hire) Thought I had a great quick answer to ceiling problem in kitchen, now have many sheets of bead board and can’t install it. help please.

And got the following answer:

What you need to do is find the Ceiling joists. They are the large [ 2×8+] horizontal wood members that your wood lath [ 1x 3/8] is attached to. The Joists should be running perpendicular to the long axis of the house and should be 24″ on center –
if you find the lath and not the joist , know that the lath always ruins perpendicular to the joists.
The rest is easy. Buy a good stud sensor . Read and understand the instructions . If aesthetics allow: It’s a lot easier to install the board and bead
across the joists always nailing in the” Valleys”. I’m sure that there are real carpenters that will either add to or correct some of this , but this is where you have to start

usud1 asked Whats the difference between the 3 popular nail guns?

I’ve been looking to buy some nail guns and a lot of them come in package deals of 3. Framing, finish and brad nailer. What’s the difference between the 3 and what are they used for?

And got the following answer:

a framing gun is used for ruff framing walls roofs sub flooring ect.a finish gun is used for installing doors base board crown molding ect.a brad nailer is used for cabinets bookshelfs ect.

dudemanyeah asked Hammer drill or powder actuated nail gun?

I am planning on finishing a basement, and wondering which is better; a hammer drill or a powder actuated nail gun. If you were finishing a basement, which would you use and why?
Specifically which should I use when framing walls in the basement? I need to secure the bottom 2×4 to the floor of the basement. Which tool works better for this?

And got the following answer:

The gun would serve your needs, in this case, just fine.
Be sure to use treated lumber for your bottom plate. While it’s not necessary, I always like to put a bead of liquid nails on the bottom of the plate before nailing as well.
Another poster suggested sill seal under the plate. This is not needed. Sill seal is installed under outside wall perimeter plates to control air penetration. It does not control moisture and ,in fact, traps moisture. As long as you use treated lumber for your plates you will not have to worry about rot, especially if you have a dry basement in the first place.